Menu: Help; Device Configuration Tabs - microHAM microKEYER II User Manual

Manuals: Link to microHAM manuals located on your system
Setup Guides: Link to software configuration guides for many common applications.
Download Documents: Downloads microHAM documentation including updated manuals and setup
guides. You may specify the products for which you want documentation.
NOTE: Requires an internet connection.
microHAM Home Page: Link to
microHAM Downloads Page: Link to
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor
Update Router: Download and install the most recent version of Rotuer.
About: Shows the Router's internal version number
There are eleven (11) tabs for configuring microKEYER II. Each tab controls part of microKEYER II's
functions. Except for CW Messages and FSK Messages, any change is applied immediately.
Ports: assign virtual ports to the microKEYER II for use by applications
●
Audio Switching: configures microphone audio routing based on operator preference,
●
application sound card handling and operating mode
Audio Mixer: sets microHAM CODEC levels.
●
NOTE: The Audio Mixer is not available under Windows Vista. The application program must
control the sound card directly.
PTT: configures T/R keying, keying sequencer and foot switch functions
●
CW/WinKey: configures the internal CW keyer
●
CW Messages: enter/store internal CW message memories
●
FSK Messages: enter/store internal FSK message memories
●
DVK: configure and control the level of Router's voice keyer
●
Keyboard: configure operation of PS/2 keyboard or keypad
●
Display: configures operation of the LCD display.
●
System Settings: configures power control and operation of the auxiliary CI-V/serial ports
●
microHAM © 2008 All rights reserved
HELP MENU
www.microHAM.com
www.microham.com/contents/en-us/d29.html

DEVICE CONFIGURATION TABS

17