Sound Rocker Set-Up - Pyramat PM440-W Owner's Manual

SOUND ROCkER SET-UP

1
Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
Secure velcro tab on the bottom
of the rocker.
2
Place the Sound Rocker so
that the control panel is less than
9 ft./2.75 meters from the power
source.
3
Connect the power adapter
to the power DC port on the
control panel. Then, plug the power
adapter into an electrical outlet.
3
CAUTION:
Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.