Siemens S55 User Manual page 62

S55 Am.Eng., No Ref. No. (only PDF) (24. June 2002, 15:39)
Set e-mail profiles
K
§Menu§ Messages
Select function
K E-mail K
Before using this function you must
set the server access and your e-mail
options. The data for this may alrea-
dy have been preset. If not, your ser-
vice provider will supply you with the
relevant information. See also on the
Internet at:
www.my-siemens.com/S55
Note
Your service provider must support the
following protocols for successful data
exchange with the e-mail server:
POP3 and SMTP or eSMTP.
E-mails will be MIME-encoded for trans-
mission.
Encryption of e-mail transmission (SSL,
APOP) is not possible at present.
Service provider
5 connection profiles can be de-
fined. To use a profile, its GPRS data
or CSD data must be set.
G
Select profile.
To set GPRS data and CSD
§Edit§
data see p. 95.
Messages
K
Setup
E-mail accesses
5 access profiles can be defined. To
use a profile, the access data must be
set.
D
Select profile.
§Aktiv.§ Press to activate the
profile.
If no access data have been defined
for the profile, the entry card is dis-
played.
Alternatively:
Press.
§Options§
Change settings
Select.
Make your entries field by
D
field:
¹ Fill in entries using
the Addressbook.
Service
Select the Network,
provider
change with
Login name:
Your name.
E-mail
Your e-mail address, e.g.:
address *:
name@domain.abc
Reply address:
A further e-mail address
to which you may send
replies.
User ID: * Your user ID.
Password:*
Your password.
POP3 server: *
Server for incoming
e-mail
POP3 Port:*
(standard value: 110)
62
§Edit§
.