Siemens S55 User Manual page 102

S55 Am.Eng., No Ref. No. (only PDF) (24. June 2002, 15:39)
102
Headset
If an original Siemens Headset is
used (p. 126) the profile is automati-
cally activated when the headset is
plugged in.
User-definable settings
Auto answer
(factory default: off)
Calls are accepted automatically af-
ter a few seconds (except where the
ringer is switched off or set to beep).
You should therefore be wearing the
headset.
Eavesdropping is possible!
Automatic setting
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Auto answer
If you fail to notice an incoming call there is
a risk that it may be overheard by others.
Setup