Thank you for purchasing the GOgroove SonaWave HD Speaker System. Boasting a powerful 22-watt SonusMAX speaker and subwoofer arrangement, this elegantly crafted system will astound you whether you are enjoying music privately or enter- taining a crowd. On-board controls are paired with a wireless IR remote for iPhone®...
Operating Instructions: Listening to music from your iPhone or iPod Connect GOgroove SonaWave HD to a power source The SonaWave HD comes with an (b) AC power adapter for connecting to any standard wall outlet. The (b) AC power adapter is 100-240v meaning it will work anywhere in the world with the correct plug add-on.
Page 4
Listening to music from your iPhone or iPod (cont’d) Dock your iPhone or iPod The dock connector is located on top of the SonaWave HD. The dock has been designed to accommodate your iPhone or iPod without a case on. Please remove your protective case before docking it onto the SonaWave HD to ensure a good connection.
Please make sure that the SonaWave HD is connected to a power source and the (10) Power switch is set to the ON position. Also, make sure that the SonaWave HD is in Active Mode. Active Mode is indicated by a solid blue (12) Status LED. You can control volume settings with the (c) wireless IR remote, although play set- tings and menu navigation will be disabled.
Troubleshooting The blue (12) Status LED will not turn on. - On the back of the SonaWave HD, please set the (10) Power switch (ON/OFF) to - Please make sure that the AC wall outlet you are using is properly working. There is no music, OR music is distorted / low quality.
Cautions - Keep in a safe place free from dust, liquid and extreme temperatures - Only use this device with the recommended power sources - Keep out of reach of small children - When not in use, please disconnect batteries or power sources Product Specifi cations Speakers: (5W x 2) drivers, 12W subwoofer, 22W RMS Dimensions: 14 x 6.25 x 6.25 inches...