BMW F 800 GS Rider's Manual page 98

8
96
Lift front wheel and insert
axle 5 as far as possible.
Tighten right-hand axle clamp-
ing screws 2 with specified
z
torque or use suitable tool to
brace for next work step.
Pinch bolt of quick-re-
lease axle
Tightening sequence: 2x
each side, alternately
14 lb/ft (19 Nm)
Install the axis screw 3 with
torque.
Front quick-release axle
in axle mount
22 lb/ft (30 Nm)
Tighten the left-hand axle
clamping screws 4 with torque.
Pinch bolt of quick-re-
lease axle
Tightening sequence: 2x
each side, alternately
14 lb/ft (19 Nm)
Loosen right-hand axle clamp-
ing screws 2 again if neces-
sary.
Remove front wheel stand.
Place right-hand brake caliper
on brake disk.