Motor-Related Error; Error In Temperature Sensor - Asko WL6532 XXL Service Manual

rum Wa

6-9. Motor-related Error

1) E5 (DC-Link High Voltage) Error
$ In case DC-link voltage to IPM increases to 450V or higher
% Motor operation is stopped and 'E5' is shown in display window.
& Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
' Error display is cleared when turning off/ on power.
2) E6 (EMG) Error
$ In case current detected with EMG port is of 20A or higher
% Motor operation is stopped and 'E6' is shown in display window.
& Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
' Error display is cleared when turning off/ on power.
3) E7 (Direction) Error
$ In case signal of Hall IC is different from the predicted signal according to direction of rotation
% Motor operation is stopped and 'E7' is shown in display window.
& Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
' Error display is cleared when turning off/ on power.
4) E8 (Initial Operation Fail) Error
$ In case input signal of Hall IC is abnormal due to problems in motor connection, etc.
% Motor operation is stopped and 'E8' is shown in display window.
& Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
' Error display is cleared when turning off/ on power.

6-10. Error in Temperature Sensor

1) H2 Error - Washing temperature sensor open/ short
$ In case washing temperature sensor is defective or not connected
% Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
& Error display is cleared when turning off/ on power.
2) H4 Error - Washing temperature sensor overheating
$ In case temperature detected by washing temperature sensor is 95) or higher
% Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
& Error display is cleared when turning off/ on power.
42