Yamaha 212SS Owner's Manual page 70

3
Operation
5) Collapse the front support poles
until the snap buttons click into place
to tighten the top fabric.

 Front Support Poles
Do not exceed 45 mph (72 km/h) with
the Bimini top in the up position.
Storing
1) Extend the forward support poles by
pressing in the snap buttons.
2) Remove the spring-loaded pins.
Push the forward support poles
back and clip the plastic supports
into place on the other support
poles.
3) Unzip the flaps holding the top to the
rearmost tower tube.
4) Roll the fabric around the frame. Put
on the storage cover and zip it into
place.
5) Secure the top to the tower using
the straps provided.
Trailering with the Bimini Top
The top must be in the lowered position,
covered, and strapped to the tower or
removed from the tower entirely before
attempting to trailer the boat.
Removing the Bimini Top
1) Follow the steps for storing.
2) Remove the lock pins holding the
Bimini top to the mounting brackets.
3) The top can now be removed from
your boat.
When reinstalling the Bimini top, simply
reverse the removal steps making sure
the lock pins are fully engaged.
See page 4-4 for Bimini top care infor-
mation.
3-14