Download Print this page
Digitus INTELLIGENT 8X8DS-48102 User Manual
Digitus INTELLIGENT 8X8DS-48102 User Manual

Digitus INTELLIGENT 8X8DS-48102 User Manual

Intelligent 8 x 8 video / audio matrix switch

Advertisement

Quick Links

INTELLIGENT 8 X 8
VIDEO / AUDIO MATRIX SWITCH
User Manual
DS-48102

Advertisement

loading
Need help?

Need help?

Do you have a question about the INTELLIGENT 8X8DS-48102 and is the answer not in the manual?

Questions and answers

Summary of Contents for Digitus INTELLIGENT 8X8DS-48102

  • Page 1 INTELLIGENT 8 X 8 VIDEO / AUDIO MATRIX SWITCH User Manual DS-48102...
  • Page 2 1. Introduction Thank you for purchasing the Intelligent 8 X 8 Video / Audio Matrix Switch! We recommend that you read this manual thoroughly and retain for future reference. 1.1 Features The Intelligent 8 X 8 Video / Audio Matrix Switch allows you to display up to eight computer’s video inputs on eight monitors or projectors.
  • Page 3: Specifications

    2. Specifications 2.1 General Specification 8 x 8 Number Of Computers & Monitors Controlled Selection Method Push Button or IR Remote Control Green for PC Selected LED indicators Blue for PC ON-Line Video 8 x HDB-15 female PC connector ports Speaker 8 x Stereo speaker jacks Video...
  • Page 4 3. Connecting the VGA Switch 3.1 System Requirements 1. Requires eight HDB15 male to male cables to connect your monitors or projectors through HDB15 female ports 2. Requires eight HDB15 male to male cables to connect your computers through HDB15 female ports 3.2 Diagrams of connections...
  • Page 5: Operation

    3.3 Matrix VGA switch installation  Steps sequence: 1. Use HDB15 male to male cables to connect the VGA ports of your monitors or projectors to the VGA ports of VGA switches. 2. Use HDB15 male to male cables to connect the VGA port of your computers to the VGA ports of VGA switches.
  • Page 6 4.2 IR Remote Controller Please remove the Isolation using Mylar before  Remove the isolation mylar from the IR remote controller before using the IR remote controller.  The operation procedure of Remote Control is separated two steps respectively.  First Step: ( Monitor selected ) Press targeted monitor among monitor 1~8 on IR remote controller to select the connected monitors to display the video outputs, then two beeper sound alerted.
  • Page 7: Fcc Statement

    Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.

This manual is also suitable for:

Ds-48102