Samsung LE32C53 Series Service Manual page 32

4-1-4. No video (HDMI1, 2, 3, 4 - Digital signal)
Symptom Audio is normal but no picture is displayed on the screen.
-
Check the HDMI source.
-
Major
Check the HDMI switch, Check the Chelsea.
-
checkpoints
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
Diagnostics
3
2
Caution Make sure to disconnect the power before working on the IP board.
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Yes
Check the HDMI source and
check the connection of HDMI cable?
Yes
Does the signal appear at
CN1002 (Pin#12 , #7 )(HDMI1)
CN1006 (Pin#12 , #7 )(HDMI2)
CN1001_550 (Pin#12 , #7 )(HDMI3)
CN1004 (Pin#12 , #7 )(HDMI4)
(HDMI RX_Clk , RX_Data) ?
Yes
Does the digital data appear at
TP-E_TXCLK+, E_TXCLK- ,
O_TXCLK+, O_TXCLK-?
Yes
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
No
Check a set in the 'Stand-by mode'.
No
Input the HDMI signal properly.
Check CN1002, CN1006
CN1001_550, CN1004.
No
Check HDMI cable.
Change the Main Assy.
Check IC1102 (SX1).
No
Change the Main Assy.
No
Please, Contact Tech support.
4. Troubleshooting
4-7