Disassembly - Samsung 732N Service Manual

11 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LS17PEA/LS19PEB
TFT-LCD monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.

11-1 Disassembly

Cautions: 1. Disassemble stand on a flat desk.
2. Disconnect the monitor from the power source before disassembly.
Description
1. Place a soft cloth on the desk and place the
monitor on the cloth upside down. Remove the
stand in the direction of the arrow.
2. Turn the monitor so the front section is facing
upwards. Remove the marked parts from the
front cover, as shown in the figure below.
3. Remove the marked part from the top edge of
the front cover, as shown in the figure below.
11 Disassembly and Reassembly
Picture Description
11-1