Motor Assembly - Invacare Apollo Maintenance And Parts Manual

Mkii indoor/outdoor and mkiv indoor
Table of Contents

Advertisement

Apollo

Motor Assembly

General Description
1
The Fracmo motor has been specially designed for powered wheelchairs to give high performance,
extended battery life and high efficiency.
2
The unit is supplied with a electromagnetic brake, which can be supplied wound either for 12 or 24 volts
depending on the system requirements.
3
The carbon brushes have been selected to give extended life, low noise and are easy to replace if required.
4
The geared unit consists of a hardened worm cut on the armature shaft and a bronze worm wheel fitted to
hardened pinion gear, which then drives a hardened output gear fitted to the shaft.
5
The motor uses high-powered magnets and the armature is balanced to reduce any vibrations.
6
The motors can be supplied with suppression to make EMC compliance easier.
7
The unit has been designed to give a maximum noise level (off load) of 60-62 dBA when measured at 12"
or 30cms from all surfaces.
Specifications Apollo Indoor
Weight of unit
Geared Motor
Part No.:
Drawing No.:
Motor type:
Frame size:
Motor voltage:
Bearings:
Holding brake torque:
Holding brake voltage:
Watts output:
Watts input:
Motor rpm:
Full load current:
Gearbox
Type:
Ratio:
Output rpm:
Output torque:
Page 2.18
4kg
451-25-025-G30-35A/B
45225/025
Permanent magnet
M45225
24 volts
Single row ball bearings
1.5Nm
12V
70W
116W
4000
4.85 amperes
RAWS 30
35:1
115
2.7Nm
02/02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apollo mkii outdoorApollo mkiv indoor

Table of Contents