Brady BMP 71 User Manual page 86

For multiple serialization:
Complete Steps 1 through 7 above.
8.
On the Editing screen, navigate to the next sequence location (cursor position) on the
9.
label.
If creating a compound serialization to display at the same cursor position on the
label, skip Step 10 below and proceed immediately to Step 11.
Press Serial
10.
The previous serialization values display in the dialog box presented.
Navigate to the Add Seq 2 option box and press OK
11.
In the Sequence #2 Start Value field, enter the start value for that sequence.
12.
In the Sequence #2 End Value field, enter the end value for that sequence.
13.
In the Sequence #2 Increment field, enter the increment for that sequence.
14.
Note Note
.
Serialization
Add Serialization
or Enter .
BMP71 User's Manual
75