Turning On The Power - Hitachi CPS318W User Manual

TURNING ON THE POWER

Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
VIDEO
ASPECT
MAGNIFY
ON
OFF
FREEZE
Control panel
STANDBY/ON INPUT KEYSTONE
NOTE
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
14
Downloaded from www.Manualslib.com
1
STANDBY/ON
RGB SEARCH
AUTO BLANK
HOME PAGE UP VOLUME
2
END PAGE DOWN
MUTE
KEYSTONE
LANP
TENP
POWER
RESET
3
Turn the
4
manuals search engine
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
Turn on the projector's power
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
solid orange.
POWER indicator
Press the STANDBY/ON button (control
panel or remote control)
• The projector begins warming up and the POWER
indicator blinks green.
• The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
Remove the lens cap
The picture is projected.
power switch
STANDBY/ON