Mobile Networks; Wi-Fi - Huawei U8510-1 User Manual

Hide thumbs Also See for U8510-1:

Table of Contents

7.2 Mobile Networks

Your mobile phone will be automatically configured to use your network operator's

2G/3G service (if available) when you turn on the phone for the first time. Note that the

SIM/UIM card must be inserted (some CDMA mobile phones have an integrated UIM

card and do not need a separate UIM card)

7.2.1 Checking the Network Connection

1. Touch

> Settings.

2. Touch Wireless & networks > Mobile networks.

3. Touch Network operators or Access Point Names to check the network

connection.

Your mobile phone will automatically read the access point settings from the

SIM/UIM card (if any). For this reason, do not change the access point

parameters; otherwise, you might not be able to access network resources.

7.2.2 Turning on the Data Service

1. Touch

> Settings.

2. Touch Wireless & networks > Mobile networks.

3. Select the Data enabled check box to turn on the data connection.

7.2.3 Service Shortcuts

1. Open the notification bar.

2. Touch

at the top of the screen to switch data services on or off.

You can also touch

or off.

Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile

phone, you must have an access to wireless access points (hotspots). Obstacles that

block the Wi-Fi signal will reduce its strength.

turn the corresponding services on

Table of Contents