Installing The Battery; Charging The Battery; Important Information About The Battery - Huawei U8510-1 User Manual

Hide thumbs Also See for U8510-1:

Table of Contents

2.2.2 Installing the Battery

1. Angle the edge labeled a (with the contacts) into the bottom end of the battery

compartment.

2. Push the edge labeled b into the compartment until the battery clicks firmly into

place.

Before charging the battery, ensure that it has been properly installed on your phone.

1. Connect the USB cable that came with your mobile phone to the charger.

2. Connect the other end of the USB cable to your mobile phone. Then, to start

charging, plug the charger into an electrical outlet.

If you charge your mobile phone while it is powered on, the battery icon on the

notification bar indicates the charging status. When the battery icon changes to

your mobile phone is fully charged.

• If the battery has not been used for a long time, you may not be able to power on

your mobile phone immediately after you begin charging the battery. Allow the

battery to charge for a few minutes with the phone powered off before attempting

to power the phone on.

Table of Contents