Connecting To A Neax2000 Ivs Pbx; Using The Pbx Configuration Wizard - NEC NEAX 2000 IVS User Manual

Connecting to a NEAX2000 IVS PBX

Note:

Using the PBX Configuration Wizard

The PBX Configuration Wizard enables you to
establish the proper communication settings between
your computer and the NEAX2000 IVS. The Wizard
asks you simple questions and then uses the
information to automatically configure the connection
for the PC and the PBX.
If you have already established a connection between
your computer and a PBX, you can still run the Wizard
if you want to establish a connection to a different
PBX. The following procedure explains how to launch
the PBX Configuration Wizard.
Note:
1. Launch MATWorX 32.
MATWorX 32 User's Guide
NDA-24215 Revision 1.0
For the best performance using MATWorX
32, establish a direct communication
connection from your computer to the PBX
at 9600 baud. If you must use a modem
connection, connect at 2400 baud.
The PBX Configuration Wizard
automatically starts when you click the
Connect button if there are no
configurations established for a PBX.
Getting Started
Page 29