Edit Name - Samsung UA32D6400 User Manual

Changing the Input Source
Source
Use to select TV or an external input
sources such as a DVD / Blu-ray player /
cable box / STB satellite receiver.
■ TV / PC / AV1 / AV2 / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB / AllShare
✎
In the Source, connected inputs will
be highlighted.
✎
PC always stay activated.

Edit Name

In the Source, press the TOOLS
can set an external input sources name you want.
■ VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC /
DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD
DVD / DMA: Name the device connected to the
input jacks to make your input source selection
easier.
✎
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
When the TV is initially powered on, basic settings proceed automatically.
VHF/UHF Antenna
✎
✎
SOURCE
✎
Edit Favourites
In the Source, press the
Favourites. You can set an external input source to
Favourites.
Information
button, and then you
You can see detailed information about the selected
external device.
Refresh
In the Source, If the external devices is not displayed,
press the
for connected devices.
• Maximum thickness - 0.55 inches (14mm)
Connecting to an Antenna
Cable
or
English - 6
When connecting a PC to the
port with HDMI cable, you should set the TV to
PC mode under Edit Name.
When connecting a PC to the
port with HDMI to DVI cable, you should set the
TV to DVI PC mode under Edit Name.
When connecting an AV devices to the
(DVI) port with HDMI to DVI cable, you should set
the TV to DVI Devices mode under Edit Name.
TOOLS
TOOLS button to select Refresh. Searching
HDMI IN 1 (DVI)
HDMI IN 1 (DVI)
HDMI IN 1
button to select Edit