Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Supco LIT6P
Summary of Contents for Supco LIT6P
- Page 1 LIT6P Infra-red Thermoneter With Probe User Manual - 1 -...
- Page 2 1. Introduction The LIT6P is a convenient non-contact infra-red thermometer with probe. It combines two precision thermometers in one unit: a non-contact infra-red thermometer and a thermal penetration probe. The non-contact mode can be used for quick scans of a surface temperature, while the probe mode is used to accurately measure internal temperatures.
-
Page 3: Instrument Description
3. Instrument Description ① LCD display ② °F /°C selection button ③ Scan button ④ Infrared sensor ⑤ Laser targeting aperture ⑥ Probe sensor ⑦ Battery cover ¡ ã C /¡ ã F SCAN - 3 -... - Page 4 LCD Display ① Infrared measurement indication ② Laser indication ③ Data hold indication ④ Probe measurement indication ⑤ Low battery indication ⑥ °C temperature unit ⑦ °F temperature unit 4. Specifications ·Infra-red: Range: -4℉to 518℉(-20℃to270℃) Resolution: 0.1℉/ 0.1℃ Accuracy: ± 9℉ for -4℉ to 32℉(±5℃ for -20℃ to 0℃) ±1.5% of reading +5℉(3℃) for 32℉...
- Page 5 (0℃ to 270℃) Field of view: 6:1 Typical Distance to Target: up to 3 ft. (1 m) Laser power: <1mW Emissivity: 0.97 Over range indication: “OL” or “-OL” ·Probe: Range: -58℉ to 518℉ (-50℃ to 270℃) Resolution: 0.2℉(0.1℃) for -58℉to 392℉ (-50℃ to 200℃) 2 ℉...
- Page 6 5. Operating Instructions 5-1. Infra-Red Temperature Measurement Point the infra-red sensor at the object, and press the “SCAN” button. Release the “SCAN” button and the measured result will hold automatically. 5-2. Temperature Probe Measurement Open the probe. (Both the Infrared and probe will be turned on).
-
Page 7: Cleaning Instructions
6. D:S ratio The thermometer has a visual angle and visual spot size as follows: Make sure that the target is larger than the unit’s visual spot size. The smaller the target, the closer you should be to it. The relationship between distance and spot size is 6:1, the drawing as following: 7. -
Page 8: Warranty
submersion or washing in water. 8 Replace batteries If the sign “ ” appears on the LCD display, it indicates that the batteries should be replaced. Remove the battery cover, and replace the exhausted batteries with new ones. WARRANTY Sealed Unit Parts Co., Inc. warrants that it will repair or furnish without charge a similar product to replace any product which, within the specified warranty term after the date of sale by the... - Page 9 when said item is used in accordance with the instructions and recommendations of Sealed Unit Parts Co., Inc. This warranty applies only to products which after shipment from the factory, have not been altered, changed, repaired, or treated in any manner whatsoever.
- Page 10 Sealed Unit Parts Co., Inc. Sealed Unit Parts Company, Inc. (SUPCO) 2230 Landmark Place Allenwood, NJ 08720 USA www.supco.com info@supco.com...
Need help?
Do you have a question about the LIT6P and is the answer not in the manual?
Questions and answers