Advertisement
Using Intermount II
openings or custom-mounting the speaker as shown in
Figures 4c and 4d.
Figure 4c.
Grille
Trim Ring
06
™
in European and American 165mm
Hole
Cutout
Match Notch on
Speaker with Notch
on Trim Ring
Grille Screen
Figure 4d.
Hole Cutout
Note: If you are mounting the speakers behind the
factory door panel or grille, omit the grille and trim
ring. Place the U-shaped clips over the speaker's
outside flange, align the hole in the clip with the notch
in the speaker's basket and insert the screw through
the hole in the clip.
Clips
Mounting Surface
Advertisement
