Function Knob; Knob Frame - Philips 32” LCD TV Service Manual

Important precautions concerning the
LCD Panel Assembly:
1. When you disassemble/re-assemble the LCD
Panel Assembly
• Do not pull the FFC Cable and Board Cable
forcefully when you re-assemble.
• Be careful not to scratch the display panel when
assembling.
• Make sure to replace the Decoration Plate, LED
Lens and Leading Edge Cover to a new one when
replacing the LCD Panel Assembly.
32PFL4609/F7
[1] Stand
Assembly
Stand Neck
(S-1)
(S-1)
4-2
2. When you disassemble/re-assemble the
Function CBA Unit or the IR Sensor CBA Unit
• Be careful not to break the hooks. If you pull with too
much force, the hooks may be damaged.
• Make sure the hooks are securely in place when
assembling.
• The Function CBA Unit, Function Knob and Knob
Frame are fixed in place by the hooks. Make sure
these hooks are not damaged. Make sure the
Function CBA Unit, Function Knob and Knob Frame
are securely in place when re-assembling.
• The IR Sensor CBA Unit and Sensor Shield are
fixed in place by the hooks. Make sure these hooks
are not damaged. Make sure the IR Sensor CBA
Unit and Sensor Shield are securely in place when
re-assembling.
[2] Rear Cabinet
(S-2)
(S-3)
(S-2)
(S-3)
(S-2)
32PFL4909/F7,
32PFL4909/F8
[1] Stand Base
Assembly
Fig. D1
PL14.12-A_DC