Function Settings - Philips 5500 Series User Manual

[Sound Mode]:
•
• [Standard]: gives balanced,
outstanding sound performance in
the treble, mid and bass ranges.
[Music]: enhances treble and bass,
•
delivering bright, clear, pure sound
for piano or orchestral instrument
performances.
[Movie]: enhances film sound effects,
•
allowing you to enjoy a home
cinema-like effect.
[Sports]: enhances the smoothness
•
of the sound output, creating a
softer sound.
[Personal]: provides users with
•
customisation functions so that
all sound effect parameters are
optimised to create the best
possible experience.
• [Treble]: adjusts the treble level (the
adjustments made can only be saved in
personal settings).
[Bass]: adjusts the base level (the
•
adjustments made can only be saved in
personal settings).
[Balance]: adjusts the balance of the left
•
and right speakers.
[Auto Volume Level]: turns automatic
•
volume adjustment on when switching
channels.
[SPDIF Mode]: selects the coaxial output
•
mode.
[Audio Delay]: delays the sound output.
•

Function settings

1
Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [SETUP.
» The [SETUP] menu is displayed.
2
Press to select and adjust the settings:
[Language]: adjusts the language settings
•
of the TV.
• [PVR File System]: before carrying out
PVR operations, the USB flash drive must
be formatted and memory space allocated.
[Blue Screen]: sets the colour of the
•
screen when the TV receives no signal
(when the TV signal is not functioning).
• [Reset TV]: restores the default settings
(excluding password settings and channel
information).
[Software Version]: checks the current
•
software version.
• [Sleep Timer]: sets when the TV
automatically enters standby mode.
The options are: off/10/20/30/60/90/
180 minutes..
• [Auto Standby]: sets how long the TV
must be idle for before switching off
automatically (not applicable to PC mode).
[OSD Timer]: sets how long the menu is
•
displayed.
• [Picture Format]: the majority of signals
use 16:9, 4:3, zoom 1 and zoom 2 formats.
HDMI signal sources use 16:9, 4:3, Point to
Point, zoom 1 and zoom 2 formats.
Changing the picture format
1
Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Settings].
2
Press to select [Picture Format].
3
Select a picture format.
4
Press OK to confirm.
Summary of picture formats
The following picture formats can be configured.
Note
•
Some picture settings may be unavailable due to
differences between picture signal formats.
EN
11