Before You Begin; Install Batteries; Connect Antenna - Entone 3 mode Quick Reference Manual

2. Before You Begin

Please tune your television(s) to the channel suggested by your service
provider.

3. Install Batteries

Install the two AA batteries (provided) into the remote control.
Important!! Use only new AA Alkaline batteries to insure
consistent operation.

4. Connect Antenna

Connect the small antenna (provided) to the "Remote Antenna" connector
on the back panel of the Hydra.
5. Understanding the Remote
The diagram on page 1 provides a brief description of your new remote
control features. Entone provides this as a general guide to remote control
usage. Functions may vary between different service providers. Please
refer to your service provider's manual for specific information on remote
usage and features.
1. SETUP Special Key reserved information about current and
for remote programming future television programming.
functions.
6. VCR Controls Buttons used for
2. INPUT Used to change the VCR play/stop/ffwd/rwd/pause
current A/V input of the controls. These buttons can
selected device. also be used for VCR-like
controls with VOD services.
3. INFO Displays on-screen
7. OK Executes the currently
information about the current
television program. selected menu option.
4. LANG Changes the language 8. ENTER Confirms the channel
settings of the on-screen number entered.
menu.
9. MOVIES Displays the VOD
5. GUIDE Displays the on-screen menu. (where available)
television guide which provides
10. DTV Returns user to live
programming.
2 URC Quick Reference Guide
V2.0