Conrad 67 Operating Installations page 41

"Date/time format":Use the buttons " " or " " to switch between displaying the formats for the date and time.
Change the respective display format selected with the arrows " " or " " (for the display format for the time, for
example, you may switch between 24h- and 12h-format). Push the button "EXIT" on the IR remote control (or briefly
push the 5-directional button on the rear of the weather station) to save the setting (pushing "EXIT" on the IR remote
control cancels setting).
8. Submenu "Auto Power On/Off"
In this submenu, you can set when the weather station switches on or off independently. This can be used so that,
for example, the slideshow is displayed only at specific times, e.g. from 8 a.m. to 10:30 p.m.
First, use the arrows " " and " " as usual to choose the setting for activation or deactivation time, and push the
button "ENTER" on the IR remote control (or briefly the 5-directional button on the rear of the weather station).
Use the buttons " " or " " to switch between the settings for hours, minutes and activation/deactivation of activation
and deactivation times.
Change the value selected with the arrows " " or " " (keep them pushed for quick adjustment).
Push the button "ENTER" on the IR remote control (or briefly push the 5-directional button on the rear of the weather
station) to save the setting (pushing "EXIT" on the IR remote control cancels setting).

Programme both activation and deactivation time.
Activate or deactivate the activation and deactivation time, or activation or deactivation will only be
performed once!
9. Submenu "LCD Power Saving"
If required, this submenu can be used to set a time after which the display switches off automatically. Pushing any
button of the IR remote control or weather station can activate the display again.
Switch off power savings mode if you want permanent display.
10. Submenu "Random Slide Show"
For the order of picture display in the slide show, you may switch between two different settings:
"By Sequential": The pictures are displayed depending on file name.
"By Shuffle": The pictures are displayed randomly.
11. Submenu "Display Setting"
Use the arrows " " or " " to switch between the settings for contrast, brightness or colour saturation.
Change the settings with the arrows " " and " ".
Push the button "ENTER" on the IR remote control (or briefly push the 5-directional button on the rear of the weather
station) to save the setting (pushing "EXIT" on the IR remote control cancels setting).
41