4. Submenu "Folder Management"
The folder management can be switched on or off here. If there are no folders/directories on the memory card/flash
drive, this setting has no effect.
With the folder management switched on, the folder/directory structure of the memory card or flash drive is displayed
later when the slide show is started. The names of the folders/directories are displayed as well.
This way, the slide show can be limited, e.g. to all pictures of a specific directory, e.g. those in folder
"2012").
With the folder management switched off, the slide show will show all picture files on the memory card/flash drive
at the next start of the slide show, so as if there was no folder structure. The slide show uses all pictures on the memory
card/flash drive for display.
5. Submenu "Aspect Ratio"
Choose how the pictures are shown on the display. The weather station's display has 800x600 pixels and thus
roughly corresponds to 4:3 format.
Pictures with a different format (e.g. 16:9 or a format slightly deviating form 4:3) can be converted and displayed
differently:
"Original": Depending on picture format (e.g. 16:9 or 4:3), black bars may result when displaying a picture (top/
bottom or left/right).
"Stretch": The picture is vertically or horizontally enlarged so that there are no black bars. However, this will distort
the picture if the format deviates strongly.
"Crop": The picture is vertically and horizontally enlarged so that there are no black bars. Protruding parts of the
picture are cut off.
6. Submenu "Slideshow Mode"
3 different display types can be selected for the slide show:
"Single Mode": Each picture is displayed as a full screen picture.
"Slideshow Mode": The screen is split into 4 parts and 4 pictures are displayed reduced in size at a time.
"MultiShow": Picture display randomly switches between different sizes and positions.
7. Submenu "Time Setting"
First use the arrows " " or " " to select whether you want to set the time, date or display format for date/time. Then
push the button "ENTER" on the IR remote control (or briefly push the 5-directional button on the rear of the weather
station).
"Time": Use the buttons " " or " " to switch between the settings for hours, minutes and seconds. Change the value
selected with the arrows " " or " " (keep them pushed for quick adjustment). Push the button "ENTER" on the IR
remote control (or briefly push the 5-directional button on the rear of the weather station) to save the setting (pushing
"EXIT" on the IR remote control cancels setting).
"Date":Use the buttons " " or " " to switch between the settings for date, month and year. Change the value
selected with the arrows " " or " " (keep them pushed for quick adjustment). Push the button "ENTER" on the IR
remote control (or briefly push the 5-directional button on the rear of the weather station) to save the setting (pushing
"EXIT" on the IR remote control cancels setting).
40