Operation - DeWalt XR Li-Ion DCS310-XE Instruction Manual

This reciprocating saw is a professional power tool. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced operators use this
tool.
FIG. 2
B
C
H
A
G
D
I
F
E
K
J

OPERATION

WARNING: To reduce the risk of serious personal injury, lock the trigger switch
and disconnect battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
Variable Speed Trigger Switch (Fig. 2)
To turn the tool on, squeeze the variable speed trigger switch (A). To turn the tool off,
release the variable speed trigger switch.
The trigger switch enables you to start the application at a slow speed. The further
you depress the trigger, the faster the tool will operate.
WARNING: This tool has no provision to lock the switch in the on position and
should never be locked on by any other means.
FIG. 3
UNLOCKED
LOCK-OFF BUTTON (FIG. 3)
Your saw is equipped with a lock-off button (B).
To lock the trigger switch (A), press the lock-off button as shown in Figure 3. When
the lock-off button is depressed to the lock icon, the tool is locked. Always lock the
trigger switch when carrying or storing the tool to eliminate unintentional starting.
NOTICE: Use of very slow speed is recommended only for beginning a cut. Prolonged
use at very slow speed may damage your saw.
8
LOCKED
B