COMPONENT REMOVAL CHART
COMPONENT TO
BE REMOVED
Belt
Agitator Assembly
Motor
On-Off Switch/
Power Cord
Nozzle Housing
Motor Protector
COMPONENTS THAT
MUST BE REMOVED
Lower Plate
Agitator Assembly
Lower Plate
Belt
Dust Cover
Lower Plate
Agitator Assembly/Belt
Nozzle Housing
Motor Case
Dust Cover
Switch Cover
Lower Plate
Agitator Assembly/Belt
Height Adjust Assembly
Dust Cover
Dust Bag
- 11 -
HOW TO REMOVE
Release latches,
and tilt off.
Lift out with end caps.
Release latches,
and tilt off.
Lift out with agitator.
Pull off.
Release latches,
and tilt off.
Lift out with end caps.
Pull off.
Remove four screws and
pull off.
Pull off.
Remove two screws and
pull off.
Release latches,
and tilt off.
Lift out with end caps.
Remove three (3)screws
and lift out.
Pull off.
Pull out of dust compartment