Download  Print this page

Operating The Digital Recorder; Selecting The Recorder To Be Operated; Switching Output A And B; Multiplexer Functions - Mitsubishi Electric DX-KB5UE Installation And Operation Manual

Hide thumbs

Advertisement

Operating the digital recorder

(When connecting to the digital recorder DX-TL5000 series:)
Before operating, set the operational mode of this unit to the mode shown on the right of
each function. (Refer to page 9 for setting the operational mode.)

Selecting the recorder to be operated

1
Press the DVR No. button.
2
Press the number button (1 to 16) corresponding to the ID number of the recorder to be
operated.

Switching OUTPUT A and B

When the OUTPUT A or OUTPUT B button is pressed, the multiplexer operating function of this
unit is switched between OUTPUT A and B.

Multiplexer functions

Single screen display
When the number button (1 to 16) is pressed, the picture of the camera connected to the digital
recorder is displayed in the single screen. The number of the button corresponds to that of the
CAMERA IN terminal on the rear panel of the digital recorder.
Split screen display
When the SPLIT SCREEN buttons are pressed, the split screen of the selected type is displayed.
The different pattern of the selected split screen is displayed each time you press the button.
Sequential display
When the SEQUENCE button is pressed, the sequential screen is displayed in the screen pattern
being displayed.

Playback

Playback/Reverse playback
When the PLAYBACK button is pressed, the recorded contents of the digital recorder is played
back.
When the REVERSE PLAYBACK button is pressed, the playback in the reverse direction is
started.
When the PLAYBACK button is pressed for the first time after turning on the power of the
digital recorder, the playback starts from the oldest recording point. Otherwise, the playback
starts from the stopped position of the previous playback.
When the REVERSE PLAYBACK button is pressed for the first time after turning on the power
of the digital recorder, the reverse playback starts from the latest recording point.
Still frame playback
When the PAUSE button is pressed during playback or reverse playback, the playback
switches to still frame playback.
When the button is pressed again, the playback or reverse playback is resumed.
When the PAUSE button is pressed during stop mode, the still frame playback picture of the
latest recording point is displayed.
Changing the playback speed
When the SHUTTLE ring is turned during playback, reverse playback, or still frame playback,
the playback speed is changed. The speed changes on a step of 1 to 4 depending on the
angle of the SHUTTLE ring turned.
10
Recorder operational mode
Recorder operational mode
Recorder operational mode
Recorder operational mode

Advertisement

Table of Contents
loading

  Also See for Mitsubishi Electric DX-KB5UE

  Related Content for Mitsubishi Electric DX-KB5UE