Caution and care
HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)
NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT
Touching the inside of the cabinet or inserting foreign objects of any kind not only creates a safety hazard
but can also cause extensive damage.
MAINTAIN GOOD VENTILATION
For maximum ventilation, leave some space around the unit and place the unit on a hard level surface
only, and ensure it is not covered during use. Heavy objects should never be placed on the unit.
Never use petroleum-based cleaners. They may cause deterioration or coat flaking of the unit. Clean
with a soft cloth moistened with soap and water and wipe dry. When using chemical duster, follow the
PVC cables or leads should not be left in contact with the cabinet surface for long periods.
For excellent performance and lasting reliability install in a location that is:-
1. Well ventilated, out of direct sunlight and away from direct heat.
2. A solid vibration-free surface.
3. Free from high humidity, excessive dust and away from magnetic fields.
Placing the unit in the following places might shorten the product life:
Extremely cold places, such as refrigerated warehouses and ice houses.
Places where excessive hydrogen sulfide is likely to be generated, such as hot-springs areas.
Places or locations with salt air environment.
This unit complies with the requirements of the EC Directive 89/336/EEC, "EMC Directive," as amended
by Directive 93/68/EEC. The requirements for the susceptibility according to EN 55024 and the re-
quirements for interference according to EN 55022 (Class B) are observed for the operation on
residential areas, business, light industrial premises and in small scale enterprises, inside as well as
outside of the building. All places of operation are characterised by their connection to the public low
voltage power supply system. This unit is manufactured in accordance with EN 60950.
POWER CORD USED
The power cords for use in the U.S., the continent of Europe, and U.K. are included with this unit.
Use the appropriate one for your country.
The power cord for use in the U.S. is used for 120 V only. Never connect to any outlet or power
supply having a different voltage or frequency.
POWER SOURCE USED
Be sure to use the supplied AC adapter.
Do not place this unit close to other equipment to prevent adverse interference between them. Do
not place this unit close to strong magnetized objects. They may cause effects on the pictures or
loss of the recorded data.
Never apply volatile substances such as insecticides and do not put rubber or plastic products on
the unit for a long period. They may cause deterioration of this unit or flaking of the coating.