Returning Your System To Its Factory Condition - Acer W510 User Manual

apps. Type 'Windows system restore' in the Search Help box, then
press Enter.
Returning to a restore point
1. From Start, type 'Control Panel' and then click Control Panel in the list
of apps.
2. Click System and Security > Action Center, then click Recovery at
the bottom of the window.
3. Click Open System Restore, then Next.
4. Click the latest restore point (at a time when your system worked 4. Click the latest restore point (at a time when your system worked 4. Click the latest restore point (at a time when your system worked
correctly), click Next, then Finish.
5. A confirmation window appears; click 5. A confirmation window appears; click 5. A confirmation window appears; click Yes. Your system is restored
using the restore point you specified. This process may take several using the restore point you specified. This process may take several using the restore point you specified. This process may take several
minutes, and may restart your computer. minutes, and may restart your computer. minutes, and may restart your computer.

Returning your system to its factory condition

Returning your system to its factory condition Returning your system to its factory condition
If your computer experiences problems that are not recoverable by other If your computer experiences problems If your computer experiences problems
methods, you may need to reinstall everything to return your system to its methods, you may need to reinstall everything to return your system to its methods, you may need to reinstall everything to return your system to its
factory condition. You can recover from either your hard drive or the factory condition. You can recover from either your hard drive or the factory condition. You can recover from either your hard drive or the
recovery backup you have created. recovery backup you have created. recovery backup you have created.
• If you can still run Windows and have not deleted the recovery partition,
see "Recovering from Windows" on page 75.
• If you cannot run Windows, your original hard drive has been completely
re-formatted or you have installed a replacement hard drive, see
"Recovering from a recovery backup" on page 79.
74 - Recovery
, then click , then click
Yes Yes