Download Print this page

Tynetec xt User Manual

Compact thermal printer

Advertisement

Quick Links

REPLACEMENT PAPER
paper roll must be replaced with THERMAL PAPER only

USER GUIDE

thermal sensitive coating must be on the outside
paper rolls must be 58mm wide
maximum paper roll diameter 55mm (37.7 metres long)
FOR THE
replacement paper roll: Tynetec P/No. W00336
ADVENT xt
LOADING PAPER
COMPACT THERMAL PRINTER
1. slide the lid release button until the lid springs open
2. unwind a small amount of paper and insert into the printer
3. close the lid down and the paper is loaded
After loading, check that the paper advances properly and tear off
any excess by pulling towards you across the serrated edge.
Cowley Road, Blyth Riverside Business Park,
Blyth, Northumberland, NE24 5TF
Tel: 01670 352371
Fax: 01670 362807
Email: sales@tynetec.co.uk
Model No: Tynetec ZXT311
Website: www.tynetec.co.uk
FM0416 ISSUE A

Advertisement

loading
Need help?

Need help?

Do you have a question about the xt and is the answer not in the manual?

Questions and answers

Summary of Contents for Tynetec xt

  • Page 1: User Guide

    58mm wide maximum paper roll diameter 55mm (37.7 metres long) FOR THE replacement paper roll: Tynetec P/No. W00336 ADVENT xt LOADING PAPER COMPACT THERMAL PRINTER 1. slide the lid release button until the lid springs open 2.
  • Page 2 (24HR) Mode Note: to conserve paper all door entry related print-outs can be disabled via the Advent xt “Door Entry Setup” webpage. Example: AL 0001 INTERCM 22/12 14:20 ON The above example tells you an intercom alarm from flat 1 was detected at 14:20 on 22 December and the system was operating in onsite mode.

This manual is also suitable for:

Advent xt zxt311