Controlling Combo Devices; Vcr/Dvd/Dvr Punch-Through; Volume/Mute Control And Punch-Through; All Volume/Mute Control To Any One Mode - GE RM24948 Instruction Manual

Using Your Remote, cont.
Controlling Devices with Separate Power
On and Off Buttons
Some GE, RCA and ProScan models require you to
press the device button for more than one second
to turn the device on and the
the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different Mode buttons to control both parts of the
Combo device. For example, if you have a TV/DVD
Combo, you might need to set up one code under
the TV button to control the TV part AND a
separate code (under any other Mode button) to
control the DVD part.
VCR/DVD Punch-Through
This remote allows the 6 VCR transport buttons
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC)
to Punch-Through control from any Mode
programmed with TV, SAT or Cable codes to the
last VCR, or DVD programmed Mode you used.
This feature will not operate if the programmed TV,
SAT or Cable code has its own VCR transport
button control e.g. a TV Combo, SAT/PVR, etc.

Volume/Mute Control and Punch-Through

This remote lets you select which device Mode
controls your Volume/Mute buttons. The remote is
initially set for all device Modes to use their own
Volume/Mute control if present. If the programmed
code has no Volume/Mute operation of its own then
those buttons will punch-through control to the TV
Mode device without needing to change to TV
Mode.
Any Mode chosen for Volume/Mute control
MUST have its own Volume/Mute function or
the Volume/Mute buttons will do nothing.
button to turn
POWER
8
Using Your Remote, cont.
Setting ALL Volume/Mute Control to any
one Mode
This routine can set all Modes to "punch-through" to
any one chosen Mode for Volume/Mute button
control without the needing to change to that Mode.
1. Press and hold SETUP until the red
indicator turns on, then release SETUP.
2. Press and hold MUTE until the red
indicator blinks off, then release MUTE.
3. Press and release the desired Mode
button (TV, VCR) for Volume/Mute control,
the red indicator blinks then stays on.
4. Press and release MUTE and the red
indicator turns off. The red indicator will
blink rapidly for three seconds if the Mode
you have selected has no Volume/Mute
control.
All other Modes will now punch-through to your
chosen Mode for Volume/Mute control.
Returning Volume/Mute Control to Initial
Default Settings
This routine returns Volume/Mute control to its
default (factory) settings i.e. all device Modes
use their own Volume/Mute control if present or
else they will punch-through control to the TV
Mode device.
1. Press and hold SETUP until the red
indicator turns on, then release SETUP.
2. Press and hold MUTE until the red
indicator blinks off, then release MUTE.
3. Press and release MUTE and the red
indicator turns off. Volume/Mute control
is returned to its default (factory)
settings.
9