Programming For Dbs System - GE RM24925 Instruction Manual

Programming For DBS Satellite System
Most GE, RCA and ProScan Satellite systems
will not require programming. Check to see
if your DBS Satellite system responds to the
remote before you begin programming.
1. Manually turn on the DBS system. Find
the three digit code for your DBS
system in the code list below.
2. Press and hold the CODE SEARCH but-
ton
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
3. Press and release
the DBS button (The
INDICATOR LIGHT
will blink then
remain lit.
4. Enter the code
using the Number
Buttons. After your
code is entered, the
INDICATOR LIGHT
will turn off. If the
code is not valid, the
INDICATOR LIGHT
will blink. Check the
code list and repeat pro-
cess.
5. Aim the remote at
your DBS system and
press the
ON•OFF button. Your
DBS system should turn
off.
6. With your DBS System on, press
CHAN+ (CHANNEL UP). If the satellite
system responds, no further programming
is required.
NOTE: If your DBS system does not
respond, try all the codes for your brand. If
the codes do not work, or your brand is not
listed, try the Code Search method.
7. Enter your code here for easy reference.
CODE
SEARCH
1 2
4 5
7 8
SATELLITE CODE
8
INDICATOR
LIGHT
SAT
(BLINK)
3
6
(OFF)
9
0
ON•OFF
CHAN +