DuroStar DS4400 Owner's Manual page 5

WARNING: This generator produces powerful voltage, which can result in
electrocution.
• ALWAYS ground the generator before using it (see the "Grounding the Generator"
portion of the "PREPARING THE GENERATOR FOR USE" section).
• Generator should only be plugged into electrical devices, either directly or with an
extension cord. NEVER connect to a building electrical system without a qualified
electrician. Such connections must comply with local electrical laws and codes.
Failure to comply can create a backflow of power, which may result in serious injury
or death to utility workers.
• Use a ground fault circuit interrupter (GFCI) in highly conductive areas such as metal
decking or steel work. GFCIs are available in-line with some extension cords.
• Do not use uncovered in rainy or wet conditions.
• Do not touch bare wires or receptacles (outlets).
Do not allow children or non-qualified persons to operate.
•
WARNING: This generator produces heat when running. Temperatures near
exhaust can exceed 150°F (65°C).
• Do not touch hot surfaces. Pay attention to warning labels on the generator denoting
hot parts of the machine.
Allow generator to cool several minutes after use before touching engine or areas
•
which heat during use.
CAUTION: Misuse of this generator can damage it or shorten its life.
• Use the generator only for its intended purposes.
• Operate only on dry, level surfaces.
• Allow generator to run for 3 - 5 minutes before connecting any electrical devices.
• Shut off and disconnect any malfunctioning devices from generator.
• Do not exceed the Wattage capacity of the generator by plugging in more electrical
devices than the unit can handle (see "PRECAUTIONS-OVERLOADING THE
GENERATOR").
• Do not turn on electrical devices until after they are connected to the generator.
Turn off all connected electrical devices, and turn off the breaker, before stopping
•
the generator.