Klipsch RoomGroove Owner's Manual page 5

Remote Control
The wireless remote control allows interaction with the RoomGroove and iPod as well as other transmitting devices such as other RoomGrooves
and Klipsch cinema systems such as the CS-700.
Note: This remote must be pointed at
the RoomGroove for proper interaction.
Buttons
Power
Press to turn the RoomGroove "On". Press again to put the RoomGroove
into "Standby" mode.
RoomGroove
iPod Selects the iPod docked in the local RoomGroove.
Aux
Selects the audio device connected to the local RoomGroove (the audio
device must be playing to be heard).
Listen
Toggles through available sources both local and wireless.
Cinema System Sources
CD/DVD
Accesses the CD/DVD drive of the cinema system connected to the
KlipschCast network.
AM/FM
Accesses the AM/FM tuner of the cinema system connected to the
KlipschCast network.
Cab/Sat
Accesses audio from the device connected to the cinema system's
Cab/Sat input connected to the KlipschCast network. The device must be
delivering audio to the cinema system to be heard on the RoomGroove.
Aux 1
Accesses audio from the device connected to the cinema system's Aux 1
input connected to the KlipschCast network. The device must be
delivering audio to the cinema system to be heard on the RoomGroove.
Aux 2 Accesses audio from the device connected to the cinema system's Aux 2
input connected to the KlipschCast network. The device must be
delivering audio to the cinema system to be heard on the RoomGroove.
Track Selection ( |
and8|  ) These buttons enable control of several different sources:
7
• When controlling the local iPod, press |
press and hold to reverse or fast-forward through the current track.
• When controlling a transmitted iPod docked in another RoomGroove, press |
to move to the previous or next track.
• When controlling the CD/DVD cinema system source, press |
previous or next track/chapter.
• When controlling the AM/FM cinema system source, press |
previous or next preset station (if no stations have been preset, these buttons will not
function).
• When controlling the Cab/Sat cinema system source, press |
previous or next channel.
• These buttons are non-functional when listening to the transmitted Aux 1 or Aux 2
sources of a cinema system.
Play/Pause
Press once to "Pause" play; press again to resume play.
Volume
Press + or - to increase or decrease the RoomGroove volume level
(local RoomGroove only).
Mute
Decreases the volume of the local RoomGroove to a zero level
(no sound).
4
and8|  to move to the previous or next track;
7
and8|   to move to the
7
and8|  to move to the
7
and8|   to move to the
7
and8|  
7