Dvd Functions; Sat Functions; Code Entry; Direct Code Entry - GE RM24922 Instruction Manual

DVD Functions

This remote controls many DVD functions. The
descriptions may vary from your original remote
descriptions.
REW and FF buttons control the speed of Fast
Forward and Reverse Playback respectively.
CHAN+/CHAN- buttons respectively locate the
succeeding or preceding Chapters or Tracks on a
disc.
INFO button brings up DVD Display or Control
Menu for Chapter/Track/Title number, Time remain-
ing/elapsed indication, system information, etc.
MENU brings up the DVD disc Menu screen - use
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
OK button is used for on-screen Menu selection.
Note some DVD players require the Play button to
be used.
EXIT Exit On-Screen Menus and/or Return to
previous On-Screen selection.
PLAY button is used to start Disc playback and for
Menu selection on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY
to resume.
INPUT brings up the DVD Players Setup Menu.
Note, not all DVD Players support all the functions
described above.

SAT Functions

CHAN+ and CHAN- buttons perform the "Page+"
and "Page-" function for on-screen Guide Menus
used by some Satellite systems.
INFO button brings up Satellite Display screen for
current Channel and system information.
MENU brings up the Satellite Menu screen - use
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
GUIDE Displays on-screen program guide.
OK button is used for on-screen Menu selection.
EXIT button is used to Exit or Clear on-screen
Menu displays.
INPUT button performs the Satellite TV/SAT func-
tion.
6

Direct Code Entry

1. Press and hold the SETUP button until
the red indicator stays on, then release
the SETUP button.
2. Press and release the desired mode
button ( , , etc.). The red indicator
TV VCR
blinks, then stays lit.
3. Enter the 4 digit code from the code
tables (on separate
sheet). Note: after a
valid code entry, the
red indicator turns off.
For an invalid code, the
red indicator flashes.
4. With your device on,
press ON/OFF. If the
device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other
codes for your brand.
Write your codes down here for easy reference
later.
Device Device stored Code
TV
VCR
CBL
DVD
SAT
AUX
TV
7