Flowpro 84636 Instruction Manual

Portable Unit Heater
Model 84636 240V~60Hz 4800 WATTS
READ AND SAVE THESE INSTRUCTIONS
efficient operation of the heater. Carefully read these instructions before
installation, operation, or cleaning of the heater. User should always
following this instruction to reduce the risk of fire, electric shock, and injury
TYPE
to persons.
WARNING!
For Model No: EH - 4605B (4800W)
always be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following.
1. Read all instructions before using this heater.
2. Connect to property grounded outlets only. Check heater voltage and
amperage on back of heater to make sure it agrees with the electric
service supplied.
3. Do not use outdoors.
4. This heater is not intended for use in wet or damp locations. Never
locate heater where it may fall into a bathtub or other water container.
5. Heater is hot when in use – to avoid burns, do not let bare skin touch
hot surfaces. Always use provided handle when moving the heater.
Ensure a minimum clearance of 5.5 inched (14cm) from both sides
84636-Instruction-English—200806
Please read these instructions carefully and
keep for future reference
IMPORTANT
INSTRUCTIONS
Read Carefully-These instructions contain vital
information for the proper installation, use and
PLUG TYPE
30 amp 240V
NEMA # 6 - 30P
When using electrical appliances, basic precautions should
1 of 5
INSTRUCTION MANUAL
Printed in China
SAFETY