Lampo IP65 LED User Manual page 17

CHANNEL 1: GREEN, to control the light output of the green leds, from OFF to the Max Power.
DMX value
0
From 1 to 254 Proportional Light output increase
255
CHANNEL 2: GREEN fine, 16bit regulation of green leds
DMX value
From 0 to 255
CHANNEL 3: RED, to control the light output of the red leds, from OFF to the Max Power.
DMX value
0
From 1 to 254 Proportional Light output increase
255
CHANNEL 4: RED fine, 16bit regulation of red leds
DMX value
From 0 to 255
,
CHANNEL 5: BLUE to control the light output of the blue leds, from OFF to the Max Power.
DMX value
0
From 1 to 254 Proportional Light output increase
255
CHANNEL 6: BLUE fine, 16bit regulation of blue leds
DMX value
From 0 to 255
,
CHANNEL 7: AMBER
DMX value
0
From 1 to 254 Proportional Light output increase
255
CHANNEL 8: AMBER fine, 16bit regulation of amber leds
DMX value
From 0 to 255
CHANNEL 9: STROBE
This channel sets the parameters of the strobe effect.
On the following table you have the dmx values, the strobe frequency (flash speed) and the strobe hold.
Strobe frequency
DMX value
(Seconds)
Da 0 a 9 0.00
10 2,00
11 1,88
12 1,76
13 1,64
14 1,52
15 1,40
16 1,28
Advanced mode, 16bit colour resolution:
function
Led OFF
Led at max power
function
16bit regulation
function
Led OFF
Led at max power
function
16bit regulation
function
Led OFF
Led at max power
function
16bit regulation
to control the light output of the amber leds, from OFF to the Max Power.
function
Led OFF
Led at max power
function
16bit regulation
Strobe light hold
(Seconds)
0.00
0,16
0,16
0,16
0,15
0,15
0,15
0,15
13C d
Strobe frequency
DMX value
(Seconds)
34
35
36
37
38
40
41
42
16
Strobe light hold
(Seconds)
0,32 0,07
0,30 0,06
0,28 0,06
0,26 0,06
0,24 0,06
0,20 0,05
0,19 0,05
0,18 0,05