Network Configuration Examples; Access Point; Acces Point - 4gon ENH202 User Manual

11 Network Configuration Examples

This chapter describes the role of the ENH202 with 4 modes. The Access Point mode's default
configuration is a central unit of the wireless network or as a root device of the wired
environment. Repeater Mode and Mesh Network Mode need additional configuration.

11.1 Access Point

192.168.1.11
Client
192.168.1.12
Client
Access Point
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
For more advanced settings, please refer to the previous chapters.
Wireless Client
Step 1
Step 2
Step 3
Step 4
The ENH202's Access Point Mode does not provide a DHCP server so the
Wireless Client IP address must be configured manually in Local Area Network Settings.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
SSID2
192.168.1.1
ENH202
SSID1
Login to the web-based configuration interface with default IP
192.168.1.1
Select your country or region's regulation.
Use site survey to scan channels of the nearby area.
Select a channel with less interference.
Specify the SSID for your broadcast SSID and you can also
configure multiple SSID at the same time.
Verify VLAN identifier in order to separate services among clients
Setup the authentication settings.
Select Apply to process all of the configurations.
Select the Wireless Mode you would like to associate with.
Use Site Survey to scan for nearby Access Points and select the
AP that you would like to connect with or enter the SSID
manually.
Configure VLAN ID in your wireless device if available.
Select the correct authentication type and password.
192.168.1.10
Client
Ethernet