4gon ENH202 User Manual page 47

Aggregation
Wireless Traffic
Shaping
Incoming Traffic Limit
Outgoing Traffic Limit
Accept / Cancel
Please make note of the following:
1. Accept does not apply the changes – you must go to Status -> Save / Load to apply
the new settings. Please refer to Chapter 4.1 for more information.
2. Changing Wireless Advanced Settings may lower the wireless connection quality.
Please keep all settings as default unless you understand the modifications which you
have made.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
The shorter guard interval results in a higher packet collision rate
when the delay-spread of the channel exceeds the guard interval
or if timing synchronization between the transmitter and receiver
is not precise.
Aggregation is to merge the typical size of data's header to one
data. It is useful for the small size but more packets.
Place a check to enable Wireless Traffic Shaping function.
Specify the wireless transmission speed for incoming traffic.
Specify the wireless transmission speed for outgoing traffic.
Press Accept to confirm the changes or Cancel to return
previous settings.