Advertisement
Troubleshooting
Chime doesn't work:
1.
Make sure push button switch is depressed and held for at least 1 second.
2.
Make sure plastic tag is removed from battery.
3.
Make sure house code switches 1-6 on chime and push button match
exactly.
4.
Verify battery orientation in push button.
5.
Try fresh batteries.
6.
Make sure chime is not farther than 150 feet away from push button.
7.
Ensure push button is not mounted on metal, near metal studs, or near the
floor.
8.
Try a new location for the chime.
Functional range may be adversely affected by one or more of the following
factors: weather, radio frequency interference, low transmitter battery and
obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following conditions:
1. This device may not cause harmful interference, and
2. This device must accept interference received, including any interference that
may cause undesired operation.
For technical support contact Jasco Products Company at 1-800-654-8483
or www.jascoproducts.com
Made in China
is a trademark of
General Electric Company
and is used under license to
Jasco Products Company LLC,
311 N.W. 122nd Street,
Oklahoma City, OK 73114.
www.jascoproducts.com
Rev. 1-07
19208
Advertisement
