Specifications; Declaration Of Conformity - CADDX NX-408E Installation Instructions Manual

Specifications

Compatibility: NX-4, NX-6, NX-8, NX-8E control panels
Frequency: 319.5 MHz (NX-408E, NX-416E, & NX-448E)
433 MHz (NX-408E-I, NX-416E-I, &
NX-448E-I)
Required Power: 12.0 VDC (provided by panel)
Current Draw: 20 mA maximum
Operating Temperature Range: 32° to 120°F (0° to 49°C)
Storage Temperature: -30° to 140°F (-34° to 60°C)
Maximum Humidity: 90% relative humidity, non-
condensing
Dimensions: 4.65" (11.8 cm) x 3.20" (8.1 cm)
U.L. Listings
The NetworX NX-E Series Receiver Modules (60-904) are
U.L. Listed for UL1023 Household Burglary, UL985
Household Fire, and are listed for use with the following
U.L. Listed devices:
NX-451 Door/Window Sensor (60-670-95R)
NX-470 4-Button Keychain Touchpad (60-659-95R)
NX-475 Water-Resistant Pendant Panic Button (60-578)
NX-480 PIR Motion Sensor (60-639-95R)
NX-490 Wireless Smoke Sensor (60-506)
Notices
This device complies with FCC Rules Part 15. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by Interlogix, Inc. can
void the user's authority to operate the equipment.

Declaration of Conformity

Manufacturer's Name: .. Interlogix, Inc.
Manufacturer's Address:
2266 North 2nd Street
North St. Paul, MN, USA 55109
EU Representative: ....... Interlogix B.V.
Kelvinstraat 7
6003DH Weert
The Netherlands
Product Identification:
Product: Wireless Receiver, 433.92 MHz
Model Number: 60-904-43-8Z, 60-904-43-16Z, 60-904-43-
48Z, RX814CA, RX814CA-PCB,
RX814CS-PCB, RX16I4CA, RX16I4CA-
PCB, RX16I4CS-PCB, NX408E-I,
NX416E-I, NX448E-I
Brand: ITI / Caddx / Aritech
Means of Conformity
We declare under our sole responsibility that this product is
in conformity with Directive 93/68/EEC (CE Marking) and/
or complies to the essential requirements and all other rele-
vant provisions of the 1999/5/EC (R&TTE) based on test
results using (non)harmonized standards in accordance with
the Directives mentioned.
EMC and Safety Standards:
ETS 300 220
EN 50130-4/A1 (1998),
EN55022 class B equip. (1997)
IEC 60950: 3rd ed. (1999-4)
Test Reports (at manufacturing
site)
Notices
Approved for use in the countries marked with a check (9).
(9) Austria
(9) Belgium
(9) Denmark
(9) Finland
(9) France
(9) Germany
(9) Greece
(9) Iceland
(9) Ireland
(9) Italy
Specifications
0123
( ) Liechtenstein
(9) Luxembourg
(9) Netherlands
(9) Norway
(9) Poland
(9) Portugal
(9) Spain
(9) Sweden
(9) Switzerland
(9) United Kingdom
11