Operating Instructions - AOR LA400 Instruction Manual

4. Operating instructions

◎ Connect the AC power supply and push the red power button on the control box. A blue
LED will light up.
◎ Tune your receiver to the desired frequency.
◎ Now you need to select one of the 5 available band ranges, using the band switch
numbered from 1 to 5. Refer to the printed switch number / band range information on
the top of the control box.
Please note that position 5 is non-tunable, as the loop is wired to act as an amplified
whip antenna.
Band switch
7
5 selectable bands
10kHz to 150kHz
&
30MHz to 500MHz.