Hardware Setup - AOR LA400 Instruction Manual

3. Hardware setup

Caution!
LA400 is a RECEIVE ONLY antenna. Do not transmit with it or its circuitry will be severely
damaged, maybe even beyond repair.
As explained on the diagram below, attach the loop element to the control box, then connect
the coaxial and control cables. Finally, connect the AC power supply.
To connect LA400 to an antique receiver with 600Ω antenna terminal, use the optional
MC-600 Impedance Matching Transformer.
To antenna input socket
of your receiver
Coaxial cable
Loop element
① ① ① ①
Control cable
6
Control box
② ② ② ②
AC power supply