Related Manuals for JAMO Amplifier AT101
Summary of Contents for JAMO Amplifier AT101
- Page 1 AT-101 WARNING: Improper installation could result in damage to the amplifier. Read all instructions before installation.
- Page 2 Introduction The Jamo AT-101 Audio Stereo Attenuator with automatch can be used as a volume control for up to 64 pairs of speakers. PLACEMENT The AT-101 should not be located close to light switches/dimmers as this may cause a hum in the speakers. If the AT-101 is located close to these devices it must be mounted in a separatly grounded electrical box.
- Page 3 IMPEDANCE MATCHING 1. Identify the impedance of your speakers and the impedance requirements of your amplifier 2. Find the tabel which matches your speakers and your amplifier 3. Set the jumbers on the AT-101’s according to the table. The jum- ber settings are determined by the AT-101 with the largest numbers of speakers connected AT-101 JUMBER SETTINGS...
- Page 4 The warranty period will come into force as from the purchase date stated on the invoice. The warranty will apply for the following period of time: • 2 years for electronics (power supply, amplifier, etc.) • 7 years for other parts (cabinet, speaker units, etc.) In case of warranty inquiries, please contact your dealer.