Advertisement
MANUAL ADDENDUM
EXPORT TYPE
AKAI
PT 4
PT 24
AKAI->FAIRLIGHT
AUDIO HANDLE
Pressing the EXPORT key (F5/F6) will start the export process. During this process, portions of
audio will be discarded so that only audio that is actually needed will be copied and converted.
This is similar to the COMPILE process described in the previous section.
8
This field allows you to select the type of project you want to create
during the export. The options are:
To export to an Akai project on an Akai disk referencing Akai audio
files.
To export to a "Protools 4" Session file on a Macintosh HFS disk
referencing 16-bit Sound Designer II files.
To export to a "Protools 24" Session file on a Macintosh HFS disk
referencing 24-bit Sound Designer II files.
To export to an Akai project on an Akai disk referencing special
Akai audio files intended for playback on a Fairlight MFX3plus
system. (This option is only available when the EXPORT function
is performed on a DD8plus).
This field allows you to select how much extra audio will be copied
before and after the audio that is actually referenced in the project.
If the Handle is very large, it is likely that the source audio files will
be exported intact without being minimised.
Version 1.01-Addendum
Advertisement
