English - Alesis Elevate6 Passive User Manual

User Guide (English)
Introduction
Box Contents
Elevate 6 Passive; User Guide; Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit alesis.com/elevate-6-passive.
For additional product support, visit alesis.com/support.
Technical Specifications
Frequency Response
Frequency Range
Crossover Frequency
HF Trim
Low-Frequency Driver
High-Frequency Driver
Sensitivity
Maximum Output
Power Rating
Recommended Amplifier Power 50 W – 150 W (RMS)
Input Impedance
Polarity
Dimensions
(width x depth x height)
Weight
(monitor only)
(dBSPL)
95
90
85
80
75
70
20 50
60 Hz – 20 kHz (+3 dB)
45 Hz – 24 kHz (-10 dB)
2.2 kHz
+2 dB, 0 dB, -2 dB (above 3 kHz)
Magnetically shielded 6.5" (165 mm) woofer with a Kevlar
cone and a damped linear rubber surround
1" (25 mm) silk-dome tweeter
88 dB SPL (2.83 V / 1 m)
108 dB SPL (continuous), 114 dB SPL (peak)
100 W (RMS), 200 W (peak)
4 Ω (nominal)
Positive signal at + input produces outward LF cone
displacement
8.5" x 10.3" x 15"
21.6 cm x 26.2 cm x 38.1 cm
14.3 lbs.
6.5 kg
SPL vs. Frequency
100
200 500 1K 2K
Specifications subject to change without notice.
3
5K 10K 20K
(Hz)