Honda TRX420TE Owner's Manual page 126

1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug ( ).
3. Remove the oil filler cap ( ) and the drain plug.
Check that the drain plug sealing washer is in good condition. If
necessary, replace the sealing washer.
4. After the oil has completely drained, reinstall the drain plug and
tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is harmf ul to the environment.
6. Fill the differential with the recommended oil.
7.8 US oz (230 cm )
Make sure the oil level is at the lower edge of the oil filler inspection
hole ( ). 3
7. Install the oil filler cap.
FRONT
(3)
(1)
(1) oil drain plug
(2) oil filler cap
Differential Oil
(Except TRX420TE
1
2
182 ).
(3) oil filler inspection hole
Servicing Your Honda
)
(2)
117