Panasonic Viera TH-L32X10K Operating Instructions Manual page 38

VIERA Link "
Features available (Using VIERA Link Menu)
You can control the theatre speaker with this TV remote control by pointing at the TV's signal
receiver.
If you cannot operate, check the settings and the equipment
connections" (p. 32 - 33)
Access and control the speaker volume
Note
These functions may not work properly depending on the connected equipment.
Image or sound may not be available for the first few seconds when input mode is switched.
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre
or Amplifier. Read the manual of the equipment.
"HDAVI Control 4" is the newest standard (current as of December, 2008) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
To confirm this TV's version of HDAVI Control
38
Speaker Selection
Speaker control
1 Display "VIERA Link Menu"
2 Select "Speaker Selection"
VIERA Link Menu
Pause Live TV Start
Direct TV Rec Start
VIERA Link Control Speaker Selection Home Cinema Recorder
Speaker Selection Home Cinema
3 Set to "Home Cinema" or "TV"
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound is from theatre
speakers connected to the equipment.
Volume up / down
Volume slide bar will be displayed when
adjusting the volume of the equipment.
Mute
The sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
TV
TV speakers are active.
Note
If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch)
via an Amplifier, connect with HDMI cable (p. 33), and then select
"Home Cinema". To enjoy the sound from the DIGA Recorder in multi-
channel sound, connect an HDMI cable from the DIGA Recorder to
the Amplifier (p. 33).
"System Information" (p. 21)
Control™"
"VIERA Link features and
select
set