Panasonic Viera TH-L32X10K Operating Instructions Manual page 27

Automatically retune all channels received in the area.
Start Auto Tuning
Access "Auto Tuning"
Auto Tuning
All tuning data will be erased
EXIT
Start Auto Tuning
RETURN
All the previous tuning settings are erased.
When the operation is completed, the channel at channel position "1" will be displayed.
If tuning has not been done completely
For Auto Tuning, using the buttons on the side panel of the TV (p. 7)
Press repeatedly until "Auto Tuning" appears
1
Access "Auto Tuning"
2
Start "Auto Tuning"
3
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather
conditions, etc.)
Manual Tuning
Set channel manually after Auto Tuning.
Set Sound System and Colour System, and then perform this function.
Normally set Colour System "Auto".
If a VCR is connected only with the RF cable, select channel position "0".
Manual Tuning
1 BBC1
Fine Tuning
Manual Tuning 1
Sound System
5.5MHz
Colour System
Auto
Select the channel position
Sound System
Allows you to change the sound system used for a programme channel.
(4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz)
Select the channel you want to adjust
Colour System
Lets you select the correct transmission standard for the transmission signal being received
(Auto / PAL / SECAM / M.NTSC / NTSC)
Select the channel you want to adjust
Normally, select "Auto".
Set all channels automatically
Settings are made automatically
Auto Tuning
1
Scan
EXIT
"Manual Tuning"
Set channel manually
CH33
120
CH33
Select the channel
Set this function
Set this function
Auto Tuning
1
To return to TV
Manual Tuning
Search and store
CH2
120
1 search
2 store
27